BRANDBRIGHT BITS

 
PRESSURE GAUGES, WATER TOP UPS, STEAM PIPE, GAS JETS.

PG1 Pressure Gauge, 3/4'' (19mm) dia. 0-80 psi with `solder on' connector for 1/16" pipe
PG2 Pressure Gauge, 1/2'' (13mm) dia. 0-80 psi with `solder on' connector for 1/16" pipe
Please note that the threaded fittings on the two gauges differ (i.e. not interchangeable)

JET6 Gas Jet No.6 - as used on most locos

WATER TOP UPS Available for most locos in our range, it comprises a special check valve for screwing into the boiler and a hand held pump / water bottle, with connecting pipe that pushes into the valve.
TOP1 For Roundhouse Billy, William, Argyll, Katie or Liberty Belle – Fits in cab
TOP2 For Fowler, Lady Anne, Russell, R/house L&B – Fits under dome
TOP3 Offset style for early Lady Anne (pre 1999), Jack etc – Fits to boiler backhead
TOP4 For Accucraft Caradoc, Edrig, Lyn, Wrekin, Joan, Superior, Mortimer, Shay, etc.


STEAM PIPE Soft Copper Pipe suitable for steam use, sold by the foot (305mm).
ST-PIPE-1/8 Pipe 1/8" (3.2mm) outside diameter
ST-PIPE-3/32 Pipe 3/32" (2.4mm) outside diameter

 
 STEAM OIL
Brandbright's steam oil is as recommended and supplied by one of Great Britain's major oil companies. The two grades may be blended.
The LIGHT STEAM OIL is a thin, high temperature lubricating oil which is suitable for various applications. In 100ml long spouted or 500ml screw top bottles.
The THICK STEAM OIL is a viscous, high temperature lubricant which is particularly suited for cylinder lubrication. In 100ml long spouted or 500ml screw top bottles.

GAS ADAPTORS


For fitting to gas canisters, to fill gas fired locos. Fits butane or butane/propane mix gas canisters that have screw tops. Suits Ronson or Colibri filler valves.
GA1 Normal length for easily accessible valves e.g. R/h Fowler
GA3 Extra long for Millie when cab is fitted.

 

COW CATCHER & CYLINDER COVER
COW CATCHER

COW1 Brass Cowcatcher - as used on the Bangalore Belle. Solidly cast in brass it fits the Fowler, Lady Anne and Jack. Slight modification is required if fitting to Billy or William. Width 58mm
BRANDBRIGHT CYLINDER COVER
RCYLCOV FOR YOUR ROUNDHOUSE LOCO. Cast brass cylinder covers to decorate the upper part of the cylinder/valve chest. Just paint and glue 'em on.(pair)

NB: These are intended for the older style of cylinder, the newer style having flush sides.

 
 
email: steam@brandbright.co.uk