TENMILLE
GAUGE 'O'
This Tenmille 16mm scale, 32mm gauge track, also used as coarse scale gauge O track, is similar to the 10mm Gauge 1 track which has proved to be particularly durable, it being resilient to oils, creosote etc. and embrittlement during use outdoors. The track consists of moulded plastic sleepers with integral chairs and brass or nickel silver bullhead rail.
The sleepers (slightly smaller than the Brandbright wooden versions) are moulded in blocks of four with spacers. Push the spacers hard against the sleepers to lay straight track and cut some of the spacers away to lay curved track. The track is available as ready-assembled or in component form, AG109 or AG109A rail with AG069 sleepers, for very easy and quick self-assembly. Points are available in easily assembled kits and some versions also as ready assembled.
 
AG069A 32mm gauge Plastic Sleepers with integral chairs (7 sections for 1 yard of track)
AG069B 32mm gauge Plastic Sleepers with integral chairs (35 sections for 5 yards of track)
AG074A Assembled Point L.Hand, 32mm gauge. Brass bullhead rail plastic sleepers, 4' 6'' radius.
AG075A Assembled Point R.Hand, 32mm gauge. Brass bullhead rail plastic sleepers, 4' 6'' radius 
 

G SCALE

This Tenmille track is substantial 45mm gauge narrow gauge track which is easily matched to LGB track, with savings in cost but not in quality. Available in set lengths or as self assembly, the GS009 plastic sleepers clipping together and the GS008 brass rail sliding in. Rail and joiners are listed later in this track section.
 
GS005 G Scale (45mm gauge) 600mm Radius Curved Track incl joiners (12 req'd for circle)
GS009 G Scale (45mm gauge) Plastic Sleepering (makes 4.5 metres)
Track and rail in 1500mm lengths is available to special order. (minimum order 50 lengths)
 
 
email: steam@brandbright.co.uk